Be the first to review this product
PLANET IGS-5225-4T2S network switch Managed L2+ Gigabit Ethernet (10/100/1000) Blue
In stock
SKU
IGS-5225-4T2S
L2+ Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Ethernet Switch
- Physical Port
- 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
- 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
- One RJ45 console interface for basic management and setup
- Industrial Case and Installation
- IP30 metal case
- DIN-rail and wall-mount designs
- 12~48V DC, redundant power with polarity reverse protect function
- 24V AC power input acceptable
- Supports 5000V DC Ethernet ESD protection
- Supports -40 to 75 degrees C operating temperature
- Layer 2 Features
- Prevents packet loss with back pressure (half duplex) and IEEE 802.3x pause frame flow control (full duplex)
- High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Storm Control support
- Broadcast/Multicast/Unicast
- Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4094 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
- GVRP (GARP VLAN Registration Protocol)
- Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
- BPDU Guard
- Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 4 trunk groups with 4 ports per trunk group
- Up to 8Gbps bandwidth (duplex mode)
- Provides port mirror (1-to-1)
- Port mirroring to monitor the incoming or outgoing traffic on a particular port
- Loop protection to avoid broadcast loops
- Supports ERPS (Ethernet Ring Protection Switching)
- Layer 3 IP Routing Features
- Supports maximum 32 static routes and route summarization
- Quality of Service
- Ingress Shaper and Egress Rate Limit per port bandwidth control
- 8 priority queues on all switch ports
- Traffic classification
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application
- Strict priority and Weighted Round Robin (WRR) CoS policies
- Supports QoS and In/Out bandwidth control on each port
- Traffic-policing on the switch port
- DSCP remarking
- Multicast
- Supports IPv4 IGMP snooping v1, v2 and v3
- Supports IPv6 MLD snooping v1 and v2
- Querier mode support
- IPv4 IGMP snooping port filtering
- IPv6 MLD snooping port filtering
- MVR (Multicast VLAN Registration)
- Security
- IEEE 802.1X Port-based/MAC-based network access authentication
- Built-in RADIUS client to cooperate with the RADIUS servers
- TACACS+ login users access authentication
- RADIUS/TACACS+ users access authentication
- IP-based Access Control List (ACL)
- MAC-based Access Control List
- Source MAC/IP address binding
- DHCP snooping to filter distrusted DHCP messages
- Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
- IP Source Guard prevents IP spoofing attacks
- IP address access management to prevent unauthorized intruder
Power over ethernet | No |
---|---|
Ports type | Gigabit Ethernet (10/100/1000) |
Ports quantity | 4 |
SKU | IGS-5225-4T2S |
EAN | 4711605282406 |
Manufacturer | Planet |
Availability | In Stock |
For Harsh and Space-limited Environments PLANET IGS-5225-4T2S, the smallest, fully-managed Gigabit fiber switch for harsh environments, features 4 10/100/1000Mbps copper ports, 2 100/1000X SFP ports and redundant power system in an IP30 rugged but compact-sized case. The IGS-5225-4T2S can be installed in any difficult environment as it can operate stably under the temperature range from -40 to 75 degrees C. With such a slim enclosure, it does not need a big space to install. The switch features user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static routing capability. It allows either DIN-rail or wall mounting for efficient use of cabinet space. With 2 dual-speed SFP fiber slots, it can be flexibly applied to extend the connection distance. Cybersecurity Network Solution to Minimize Security Risks The new generation of IGS-5225-4T2S has the cybersecurity feature to protect the switch management and enhance the security for mission-critical network without extra deployment cost and effort. The new IGS-5225-4T2S expands its memory and upgrades the kernel of SSH, TLS and SSL protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, ARP Inspection Protection, 802.1x port-based and MAC-based network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before. Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-4T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 10ms. SMTP/SNMP Trap Event Alert and Fault Alarm The IGS-5225-4T2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. It supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225 series not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225 series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225 series provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-4T2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 10 trunk groups with 8 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225 Managed Ethernet Switch series is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225 series offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225 series can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. Powerful Security The IGS-5225 series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. Flexibility and Extension Solution The additional two mini-GBIC slots built in the IGS-5225-4T2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225 series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. 1588 Time Protocol for Industrial Computing Networks The IGS-5225 series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP Protocol, the IGS-5225 series can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory.
Management features | |
---|---|
Reset button | Yes |
Multicast support | Yes |
Traffic classification | Yes |
Switch type | Managed |
Web-based management | Yes |
Quality of Service (QoS) support | Yes |
Switch layer | L2+ |
Ports & interfaces | |
Copper ethernet cabling technology | 10BASE-T, 100BASE-T, 1000BASE-T |
SFP module slots quantity | 2 |
Basic switching RJ-45 Ethernet ports quantity | 4 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Gigabit Ethernet (copper) ports quantity | 4 |
Console port | RJ-45 |
Network | |
IGMP snooping | Yes |
MAC address auto-learning supported | Yes |
MAC address auto-aging supported | Yes |
Copper ethernet cabling technology | 10BASE-T, 100BASE-T, 1000BASE-T |
Networking standards | IEEE 1588v2, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ag, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Full duplex | Yes |
VLAN support | Yes |
Spanning tree protocol | Yes |
Rate limiting | Yes |
Port mirroring | Yes |
Number of VLANs | 4094 |
Link aggregation | Yes |
Flow control support | Yes |
Broadcast storm control | Yes |
Auto MDI/MDI-X | Yes |
10G support | No |
Virtual LAN features | Private VLAN, Tagged VLAN, Protocol-based VLAN |
Virtual LAN features | |
VLAN support | Yes |
Number of VLANs | 4094 |
Virtual LAN features | Private VLAN, Tagged VLAN, Protocol-based VLAN |
Data transmission | |
Number of VLANs | 4094 |
Jumbo frames | 9000 |
Throughput | 8.9 Mpps |
MAC address table | 8000 entries |
Switching capacity | 12 Gbit/s |
Store-and-forward | Yes |
Number of queues | 8 |
Jumbo frames support | Yes |
Technical details | |
Product colour | Blue |
Housing material | Metal |
Security | |
IP-MAC-Port binding | Yes |
BPDU filtering/protection | Yes |
Authentication | MAC-based authentication, Port-based authentication |
SSH/SSL support | Yes |
Security algorithms | SNMPv3, SSH, SSL/TLS |
IGMP snooping | Yes |
Access Control List (ACL) | Yes |
Multicast features | |
Multicast support | Yes |
Certificates | |
---|---|
Certification | FCC Part 15 Class A, CE |
Design | |
Wall mountable | Yes |
International Protection (IP) code | IP30 |
Reset button | Yes |
DIN rail mounting | Yes |
Product colour | Blue |
LED indicators | Yes |
Housing material | Metal |
Certification | FCC Part 15 Class A, CE |
Performance | |
Harmonized System (HS) code | 85176990 |
Indication | |
LED indicators | Yes |
Power | |
Power consumption (max) | 8.5 W |
Redundant power supply (RPS) support | Yes |
DC input voltage | 24 V |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | No |
Operational conditions | |
Storage temperature (T-T) | -40 - 85 °C |
Storage relative humidity (H-H) | 5 - 95% |
Operating temperature (T-T) | -40 - 75 °C |
Operating relative humidity (H-H) | 5 - 95% |
Heat dissipation | 29.2 BTU/h |
Weight & dimensions | |
Width | 32 mm |
Depth | 87 mm |
Height | 135 mm |
Weight | 456 g |
Ratings & Reviews
Ratings & Reviews
Be the first to review this product
We found other products you might like!
You may also be interested in
Product |
![]()
£192.50
|
![]() Bestseller
TP-Link TL-SG1048 network switch Unman...
£180.22
|
![]() Popular
D-Link 52-Port Gigabit Smart Managed S...
£278.63
|
![]() Hot Product
D-Link 28-Port Gigabit PoE Smart Manag...
£235.59
|
![]()
£221.71
|
![]() Recommended
D-Link 24-Port Gigabit PoE Smart Manag...
£220.23
|
---|---|---|---|---|---|---|
SKU |
IGS-5225-4T2S
|
TL-SG1048
|
DGS-1210-52
|
DGS-1210-28P
|
DGS-1210-48
|
DGS-1210-24P
|
Manufacturer |
Planet
|
TP-LINK
|
D-Link
|
D-Link
|
D-Link
|
D-Link
|
Rack mounting |
N/A
|
Y
|
Y
|
Y
|
Y
|
Y
|
Power over Ethernet (PoE) |
N
|
N/A
|
N
|
Y
|
N
|
Y
|
Stackable |
N/A
|
N/A
|
Y
|
Y
|
Y
|
N/A
|
Switch type |
Managed
|
Unmanaged
|
Managed
|
Managed
|
Managed
|
Managed
|
Basic switching RJ-45 Ethernet ports quantity |
3 to 4
|
46 to 48
|
46 to 48
|
22 to 24
|
46 to 48
|
22 to 24
|
Basic switching RJ-45 Ethernet ports type |
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|
Gigabit Ethernet (10/100/1000)
|